Maintain
Pipette or dispenser calibration
Calibrating a pipette or dispenser means checking it against traceable references on a set schedule and keeping the evidence for each unit. ValDoc Maintain proposes 2 plans for liquid handling equipment, starting with Liquid Handling Equipment Volume Calibration (every 6 months), and tracks each unit's due dates, work orders and service status.
Pipettes, multichannel pipettes, pipette controllers, dispensers and similar volume-measuring tools. ValDoc has no URS or IOQ for them. It plans their calibration and preventive maintenance.
Last updated
Thirty minutes. Bring one piece of equipment.
Maintenance and calibration
Maintain proposes 2 plans for a pipette or dispenser, and you confirm each cadence against the manual and your SOP. Each unit gets its own schedule and history. Maintain also offers 4 plans any family can use, such as Electrical Safety Inspection.
Calibration
Every 6 months
Liquid Handling Equipment Volume Calibration
Calibration
Every 3 months
Liquid Handling Critical Volume Check
Other equipment
ValDoc can still support equipment that is not on this list. Adding the equipment families a lab needs is part of onboarding, so tell us what you run.
- Biosafety Cabinets
- Controlled Temperature Units
- Incubators
- Centrifuges
- Environmental Monitoring
- Thermal Sealing and Welding Systems
- Weighing Devices
- Cryogenic Systems
- Stability Chambers
- Sterilization Equipment
- Transport Systems
- Label Printers
- Vacuum Pumps
See your own equipment in ValDoc.
Bring one piece of equipment, or one you plan to buy, and we’ll walk it through ValDoc with you, from its intended use to the signed record.
Thirty minutes. Bring one piece of equipment.